- Boiler Installation and Replacement
- Boiler Repair and Maintenance
- Furnace Installation and Replacement
- Furnace Repair and Maintenance
- Heat Pump Installation and Replacement
- Heat Pump Repair and Maintenance
- Radiant Heat Installation and Replacement
- Radiant Heat Repair and Maintenance
- Duel Fuel/Hybrid Heating Systems
- Unit Heater
- Garage Heater
- Ductless Mini Split Systems
- Zone Systems
Indoor Air Quality
Bartels Heating & Cooling Winter 2016 Newsletter
What to Do If Your Heater Leaves Your Holiday Guests Feeling Cold
Modern heating systems have only gotten more and more effective over the years. Like any other
mechanical system, however, any heater can run into operational problems from time to time. Some
times are more convenient than others, of course. When you have guests arriving at your home later in
the day, and your heater just failed, “convenient” is probably not the word that you’d use to describe
Fortunately for you, heating technicians are available even around the holiday season. Homeowners
cannot simply be expected to put up with cold temperatures in their homes until regular business hours
resume once more. Before you go scheduling emergency heating services, though, there are a few
things to check on your own.
Using a Heat Pump? Is It in Heating Mode?
First of all, make sure that your heat pump is actually in heating mode. Because heat pumps both heat
and cool homes, it is possible that your system was just accidentally switched over to the cooling mode.
If this is the case, the flip of a switch is all that is necessary to get your heater back to blowing warm air
to keep your guests comfortable.
Did You Double Check Temperature Settings?
No matter what type of heater you use, it is controlled by a thermostat. This may sound obvious, but
you should always double check to make sure that your thermostat is set properly and that the system is
actually in heating mode, rather than a “fan-only” mode. Radiant heating systems don’t use fans, but
you may have accidentally set the thermostat too low, so you are not feeling the desired effects from its
What About Temperature Zones?
If your heater is zoned—meaning that you can heat different areas of your home to different
temperatures—check each zone to ensure that comfortable temperatures are set. It can be easy to miss
changes in temperatures throughout the house when you are stuck in a hot kitchen all day. You may be
nice and toasty, but any guests waiting for dinner to be served may be a good deal chillier in the den.
Some Problems Will Demand Professional Attention
These are definitely best case scenarios, and there is no guarantee that the issue you’re facing with your
heater is quite this simple. If you cannot find an obvious cause of the problem, then contact your
heating technicians right away. While you focus on getting your guests squared away and dinner on the
table, they can focus on returning your heater to proper operating condition before the winter holidays
start feeling too wintery in your home.
We hope that these tips will help you to deal with any heating issues that you may encounter this
holiday season. Consider this last one a gift from us to you. Schedule routine heating maintenance
before the guests start to arrive. This is not the season for testing your luck when it comes to the
operation of your heater.
Alternative Heating Systems for Your Home
Heating systems all have the same basic duties – keeping your home cozy and comfortable no matter
what the weather might be doing outside. But there are a number of different ways to do that and what
works well for one home might not be so effective for another.
Most of us are used to traditional forced-air furnaces, which generate heat through gas burners or
electrical coils, then blow hot air through a series of ducts in your home. They are safe, effective and
versatile forms of heating, which is why so many homes use them. But prudent homeowners may be
able to do better for themselves with an alternative form of heating. What kinds of alternatives are
available? Here’s a quick list to give you a sense of what to look for.
Heat pumps use the same principles as air conditioning, but with a little twist to provide heating as well.
Refrigerant circulates through a series of valves and coils to first release hot air outside your home, then
pull heat from the air inside the system. The cool air can then be blown into your house with a fan.
Heat pumps simply provide a reversal system so that the pump cools the air outside the home and
release hot air inside when temperatures are cold. Because the refrigerant isn’t consumed, it can warm
the home for much less monthly cost than other systems can. In some cases, the heat pump alone can’t
cover your needs on cold days, which is why a smaller secondary furnace is sometimes added. Either
way, you benefit from reduced costs during the colder months.
Geothermal Heating Systems
Geothermal systems tap into the ambient temperature of the earth itself to heat your home. Once you
dig down below the frost-line of the earth, the temperature of the ground undergoes only slight
variations. Geothermal systems take advantage of that by installing tubing beneath the surface.
The liquid in this tubing facilitates a heat exchange with the ground, releasing heat from your home
when it needs cooling, and absorbing heat from the earth when your home needs warmth. The system
can then transfer that heat to the air and blow it through your home via your ductwork. Because
geothermal energy is a renewable resource, it costs far less to run than traditional heaters.
Ductless Heating Systems
Ductless heating systems are often heat pumps, though not always. They adopt a decentralized
approach to heating. Instead of one single unit, they place multiple units throughout your home, each
one handling heating duties for a particular room or section. That allows you to turn off the heat in parts
of the home you aren’t using, saving you money on bills.
Radiant Heating Systems
Radiant heating systems use hot water or electricity to create warmth in your home. They are often
installed beneath the floorboards of your home, although some models can be installed behind the
walls. They send heat into the room directly instead of heating the air itself. You stay toasty and warm,
and you’re spared cold spots, breezeways, and similar issues associated with forced-air furnaces.